Although excavators mainly carry out excavation operations, but the operation of walking is also very important! The following aspects should be paid attention to in the operation of excavator walking:

1. Before the excavator starts, it should check the environmental safety situation and clear the obstacles on the road. The unrelated personnel should leave the excavator and then lift the bucket.

2. Choose the flat road as far as possible, drive at the lowest speed when turning, and steer as much as possible when turning big.

3. Excavator walking motors are prohibited from collision or grounding on boulders, and additional force is prohibited on the track.

4. If the walking pole stops on the slope, even if it stops for a short time, the bucket should be lowered and the bucket teeth inserted into the soil.

5. Start excavator in low speed range.

6. The engine speed will rise suddenly, so the driver should operate the walking bar carefully.

7. Excavators should avoid rubbing the motor and crawler rack when walking on bad ground. The entry of mud, sand and stones into the track venue will affect the normal walking of excavators and the service life of the track.

8. When walking in the water, the water depth should not overflow the track board on the side of the chain wheel, and the state of the river bed and the water potential should be paid full attention to.

The walking of excavator is very important for the service life of excavator, so we must be cautious in the operation process.

1. 16